CSP Models - 7mm Kits

Sort By:  
CSP7-01 Hawthorn, Leslie 0-4-0ST (Ironside & Clausentum)
Hawthorn, Leslie & Co Ltd built, in 1890, two similar 0-4-0 saddle tank locomotives, named 'Clausentum' and the other 'Ironside', for the Southampton Dock Company. The locomotives passed to the London South Western Railways (LSWR), along with the dock company, in 1892. Both locomotives retained their names throughout their working lives. The pair, numbered 457 and 458, by the LSWR, carried various running numbers during their Southern Railway career. Photographic evidence suggests that 'Ironside' carried either a short or long chimney at different times. 'Clausentum' was withdrawn in 1945 but 'Ironside' survived, as BR 30458, and ended its working days in 1954 as shed pilot at Guilford.
The kit contains brass etchs for the bodywork and nickel silver for the chassis. Lost wax brass castings, wire, handrail knobs etc.
You will need to purchase: - wheels, motor and gearbox then finish by painting in the colour of your choice.

Note: - All orders are individually packed to order and may take 21-28 days for delivery, subject to available of components.

£215.00
CSP7-02- Hudswell Clark 0-4-0ST Class Contractors Locomotive ( Hudswell Clarke 0-4-0ST Industrial Locomotive Kit)

Hudswell Clarke in common with many other manufacturers in the late 19th and early 20th Centuries produced large numbers of locomotives to assist in the construction of reservoirs, docks and mainline railways. Invariably such contractors laid lightweight rails on often poorly prepared land. Locomotives of low axle loading to run on such track were required in large numbers - a very profitable business.  Most manufacturers produced standard contractor's locos, each to their own particular design, which were either 0-4-0ST or 0-6-0ST. Hudswell Clarke's contractors, 0-4-0ST version was designated their class "Aire" and introduced in the 1870s. The loco had outside cylinders (10"x16"), 2' 9" wheels, weighed 16.5 tons and an open back cab. Large numbers of these locos were to be found on all types of civil engineering contracts. On completion of the work the locos were either moved onto another contract or, as was often the case, sold to the organisation for whom the work was done. Others were sold to various concerns such as quarries or collieries. Some examples were also supplied directly by the manufacturers to such organisations.

 

Locos of essentially "Aire" class design were constructed until the late 1930s. Later locos had an overall cab.

 

One example of the class (w/no 166) was delivered to the Taff Vale Railway in 1876. Originally it was numbered 107 but renumbered 267 in 1892 when it was designated as the sole member of that company's class 'S'. In 1896 the loco was rebuilt when it acquired rather crude rear and side cab extensions. At grouping the Great Western Railway renumbered the loco 1342. However, Great Western Railway ownership lasted only until the end of 1926 when scrapping occurred. In fact the loco was made redundant in 1925 from Cardiff West Loco Yard by ex-AD & R loco Great Western Railway '1340 Trojan'. You can now have a model of both!

Locos of this class could be found at a wide variety of places and should find use in a corner of most layouts.

 

Two members of the class have survived into preservation. The loco named 'Lord Mayor' (w/no 402/93), currently owned by the Vintage Carriage Trust and located on the Keighley & Worth Valley Railway is an excellent example of the class still in its 19th century original guise. The loco was originally involved in the Manchester Ship Canal contract.

Another example, one of the later members with an all-over cab, resides on the Tanfield Railway. This loco (w/no 1672/37) now named "lrwell" worked on Stuart St Power station in Manchester until preserved.

Many thanks are due to both of these organisations for assistance granted in measuring up and photographing the loco - essential to the production of this kit.


This is a High Quality kit utilising brass etches and lost wax brass castings. Requires wheels, motor and gearbox. Full instructions included.
SPECIAL OFFER PRICE £215.00.

Note: All orders are individually packed and can take up to 21-28 days for delivery subject to availability of components

£215.00
CSP7-03 LSWR C14 0-4-0ST (C14)

The kit contains brass etchs for the bodywork and nickel silver for the chassis. Lost wax brass castings, wire, handrail knobs etc.
You will need to purchase: - wheels, motor and gearbox then finish by painting in the colour of your choice.

Note: - all orders are individually packed to order and may take 21-28 days for delivery subject to availability of components

£320.00
CSP7-U03 PECKETT W6 Class 0-4-0ST (Peckett W6)
This kit has a one piece resin saddle tank unit to ease construction whilst the rest of the body has whitemetal components. The chassis is screw together milled brass with milled nickle silver rods and lost wax crossheads. The W series were one of the commenest industrials and this version dates from 1926.
The kit contains wire, handrail knobs etc.
You will need to purchase: - wheels, motor and gearbox then finish by painting in the colour of your choice.

Note: - all orders are individually packed and may take 21-28 days for delivery subject to availability of components

£230.00
CSP7-U04 ANDREW BARCLAY CALEDONIA FIRELESS 0-4-0 (Fireless)
A real oddity with cylinders and exhaust at the 'wrong' end.
The kit contains a one piece resin steam resevoir and seperate footplate along with a milled brass screw together chassis and milled nickel silver rods, the rest being mainly whitemetal, about as easy to build as possible. Wire, handrail knobs etc. are included.

You will need to purchase: - wheels, motor and gearbox then finish by painting in the colour of your choice.

All our kits are packed to order and may take 21-28 days before delivery, depending on availability of components.

£240.00
CSP7-Z201 GWR 2021 Class 0-6-0ST (GWR 2021 Class 0-6-0ST)
GWR locos are always popular and this one is no exception. The kit features a one piece resin saddle tank and bunker units, etched brass footplate and cab, profile milled screw together brass chassis and milled nickle silver coupling rods. In addition a fully detailed interior to the open cab is provided.

The kit also contains wire, handrail knobs etc.
You will need to purchase: - wheels, motor and gearbox then finish by painting in the colour of your choice.

Note: - All kits are individually packed to order and may take between 21 & 28 days to be delivered depending on component availability

£260.00
CSP7-Z202 GWR 850 Class 0-6-0ST (GWR 850 Class 0-6-0ST)
The baby sister to the 2021 class being one foot shorter, three locos survived as saddle tanks after 1947. The specification of this kit is similar to the Z201 kit except that the footplate is a detailed one piece resin casting. These locos were used on very lightly laid lines.

The kit also contains wire, handrail knobs etc.
You will need to purchase: - wheels, motor and gearbox then finish by painting in the colour of your choice.

Note: - All kits are individually packed to order and may take between 21 & 28 days to be delivered depending on component availability

£260.00
CSP7-Z203 GWR 2021 Class 0-6-0PT (GWR 2021 Class 0-6-0PT)
GWR locos are always popular and this one is no exception. The kit features a one piece resin pannier tank and bunker units, etched brass footplate and cab, profile milled screw together brass chassis and milled nickle silver coupling rods. In addition a fully detailed interior to the open cab is provided.

The kit also contains wire, handrail knobs etc.
You will need to purchase: - wheels, motor and gearbox then finish by painting in the colour of your choice.

Note: - All kits are individually packed to order and may take between 21 & 28 days to be delivered depending on component availability

£260.00
CSP7-Z204 GWR 850 Class 0-6-0PT (GWR 850 Class 0-6-0PT)
The baby sister to the 2021 class being one foot shorter. Towards the end of their life as Saddle tanks, they were converted to Pannier Tanks. They started off with open cabs but later were changed to closed cabs. The specification of this kit is similar to the Z203 kit except that the footplate is a detailed one piece resin casting. These locos were used on very lightly laid lines.

The kit also contains wire, handrail knobs etc.
You will need to purchase: - wheels, motor and gearbox then finish by painting in the colour of your choice.

Note: - All kits are individually packed to order and may take between 21 & 28 days to be delivered depending on component availability

£260.00
CSP7-Z205 GWR 1366 Class 0-6-0PT (GWR 1366 Class 0-6-0PT)
This class was built to supplement the 1361 locos and is basically a pannier version with with modern Belpair firebox, most of the other features being similarly upgraded as they are in this kit.
The resin tank has had some extra bits added and the rest of the kit is of etched brass cab, bunker, footplate and chassis with lost wax brass parts for slidebars etc. Full cab detail is provided.


The kit also contains wire, handrail knobs etc.
You will need to purchase: - wheels, motor and gearbox then finish by painting in the colour of your choice.

Note: - All kits are individually packed to order and may take between 21 & 28 days to be delivered depending on component availability

£260.00
CSP7-Z207 GWR 517 Class 0-4-2T (GWR 517 Class 0-4-2T)
One of the Great Western's largest, most varied and longest lived classes this kit represents the most useful of the varients.  
One piece resin tank/footplate and boiler smokebox units, plus etched brass cab, bunker, footplate and chassis with lost wax brass parts for slidebars etc. Full open or closed cab detail is provided.
It is an ideal branchline push pull auto locomotive.


The kit also contains wire, handrail knobs etc.
You will need to purchase: - wheels, motor and gearbox then finish by painting in the colour of your choice.

Note: - All kits are individually packed to order and may take between 21 & 28 days to be delivered depending on component availability

£260.00
CSP7-Z208 Dean Goods 0-6-0 (Whitemetal Dean Goods)
The classic maid of all work, this kit is a classic too. The model has a resin Belpaire firebox and rivetted smokebox. The bulk of the rest of the model is etched brass and whitemetal with a prerolled boiler & 2,000 gallon tender. Full detail and loco compensation is provided.

The kit also contains wire, handrail knobs etc.
You will need to purchase: - wheels, motor and gearbox then finish by painting in the colour of your choice.

Note: - All kits are individually packed to order and may take between 21 & 28 days to be delivered depending on component availability

£320.00
CSP7-Z298 Dean Goods 0-6-0 (Resin Dean Goods)
The classic maid of all work, this kit is a classic too. The model has a resin Belpaire firebox and rivetted smokebox. The bulk of the rest of the model is etched brass and whitemetal and a rolled brass boiler & resin 2,000 gallon tender body. This latter helps to eliminate the the bending of the flares and curves. Full detail and loco compensation is provided.

The kit also contains wire, handrail knobs etc.
You will need to purchase: - wheels, motor and gearbox then finish by painting in the colour of your choice.

Note: - All kits are individually packed to order and may take between 21 & 28 days to be delivered depending on component availability

£320.00
CSP7-Z298 Dean Goods TENDER ONLY (Whitemetal TENDER ONLY)
Normally fitted to the Dean Goods locomotive this is a 2,000 gallon whitemetal tender body and etched brass chassis. Suitable for a number of other GWR classes, or just to sit on a siding or engine shed.

The kit also contains wire, handrail knobs etc.
You will need to purchase: - wheels, then finish by painting in the colour of your choice.

Note: - All kits are individually packed to order and may take between 21 & 28 days to be delivered depending on component availability

£90.00
CSP7-Z602 LNWR WEBB 'SPECIAL TANK' 0-6-0T (Webb Special Tank)
A long lived locomotive still running in BR days, they were first used on suburban passenger services.
The kit contains a resin saddle tank, cab and bunker with open cab option. Etched footplate and milled brass screw together chassis, milled nickel silver rods, brass and whitemetal castings, wire, handrail knobs etc.
You will need to purchase: - wheels, motor and gearbox then finish by painting in the colour of your choice.

Note: - all kits are individually packed to order and may take 21-28 days for delivery depending on component available

£260.00
CSP7-Z605 MIDLAND DEELEY 0-4-0ST (Deeley Tank)
This delightful little shunting locomotive is mainly etched brass with some preformed body components, you will need to roll cab top sides, and etched nickel silver Walscharts valve gear and rods. Whitemetal, nickel silver and brass castings will enable a super detailed model, intriguing to watch, and easily assembled for use in goods yards large and small. 
The kit also contains wire, handrail knobs etc.
You will need to purchase: - wheels, motor and gearbox then finish by painting in the colour of your choice.

Wheels - we have limited stock. If you require a set please click on the 'Kit Type' then 'Complete' this is for Slaters wheels. Cost £40.00 will be added to your total.
We do have some motors but NO gear sets in stock, so please contact us via e-mail to enquire of availability.


Note: - All kits are individually packed to order and may take between 21 & 28 days to be delivered depending on component availability

Thanks to Paul Gilbert for the image showing loco in MR Maroon,

£240.00
CSP7-Z606 MIDLAND BURTON TANK 0-4-0ST (Burton Tank)
These tiny little locomotives known as 'Burton Tanks' because of their use in the Burton on Trent brewery sidings can be realistically portrayed with this kit. It has a resin saddle tank/smokebox/firebox unit with etched cab, footplate and chassisbut milled nickle silver coupling rods. A true locomotive for a minimum space layout.
The kit also contains wire, handrail knobs etc.
You will need to purchase: - wheels, motor and gearbox then finish by painting in the colour of your choice.

Note: - all kits are individually packed to order and may take 21-28 days for delivery subject to availability of components

£240.00
Per Page      1 - 17 of 17
  • 1