Categories
-
CSP Model 4mm Locomotive Kits & Parts - if using mobile after clicking scroll down page
-
CSP Models - 7mm Kits - if using mobile after clicking scroll down page
-
Sanspareil Works - 7mm Finescale if using mobile after clicking please scroll down page
-
Lost and Foundry 7mm Finescale Accessories if using mobile after clicking scroll down page
-
SteamAle 7mm RTR if using moble after clicking scroll down page
-
Le Petit Train de France if using mobile after clicking scroll down page
-
Upcoming Items
STA01 M&CR Chauldron Wagon
£45.00
7mm scale, O gauge. Ready to Run Maryport & Carlisle Railway.
Suitable for many locations around the world as other companies had very similar ones.
Discount for multiple buys. Please ask via: cspmodels@outlook.com
These wagons were produced for the Maryport & Carlisle Railway by a number of manufacturers over many years until the company had the capacity to build and repair them themselves. The company eventually had over 1,000 in use at any one time. They were used between the 1840's and the grouping in 1923, even though they should have been taken off the mainline before then.
In use the wagons always had to be the same way round as the brake is on one side only.
The model has been produced as a joint venture between the Cumbrian Railways Association and SteamAle.
A number of people have been involved with its development and our thanks go to them and the manufacturers that gave help and advice along the way.
The main body of the model is cast in resin. The chassis is in whitemetal, to give weight low down with etched parts for the axles. The brake unit is a lost wax brass casting and wheels are very finescale from Slaters. The main coupling bar runs the full length of the model and is screwed in place so there should be no problems with wagons coming loose or pulling long trains!
If you want to know more please get in touch.
Suitable for many locations around the world as other companies had very similar ones.
Discount for multiple buys. Please ask via: cspmodels@outlook.com
These wagons were produced for the Maryport & Carlisle Railway by a number of manufacturers over many years until the company had the capacity to build and repair them themselves. The company eventually had over 1,000 in use at any one time. They were used between the 1840's and the grouping in 1923, even though they should have been taken off the mainline before then.
In use the wagons always had to be the same way round as the brake is on one side only.
The model has been produced as a joint venture between the Cumbrian Railways Association and SteamAle.
A number of people have been involved with its development and our thanks go to them and the manufacturers that gave help and advice along the way.
The main body of the model is cast in resin. The chassis is in whitemetal, to give weight low down with etched parts for the axles. The brake unit is a lost wax brass casting and wheels are very finescale from Slaters. The main coupling bar runs the full length of the model and is screwed in place so there should be no problems with wagons coming loose or pulling long trains!
If you want to know more please get in touch.
- Model: Chauldron Wagon
-
Manufacturer:
