CSP Model 4mm Loco Kits

2018-  Upgrade for CSP03 Kerr Stewart Victory 0-6-0T has been produced. It now comes with a lost wax brass cast chimney, dome, safety valve and tank fillers!
 

Update 10/12/17

Well it never rains but it pours, or so they say!

First the bad news - the business computer was stolen when our vehicle was broken into. Unfortunately the backup system has failed so it is back to square one for so much work. Hours and hours of work on drawings will all have to be redone, once a new computer is up and running.

GOOD News: - The majority of CSP 4mm model information is on this site or on Philip's computer. What we have lost, at the moment, is copies of all the etch /films/plates/drawings we were working on so delays in sorting out some models is inevitable. Having had to take time out to deal with family commitments Philip is now hoping to be back at work more often so delivery time for orders will reduce. He also has access to e-mails now as well!

Wheels, motors and gearboxes.
We finally got a delivery from Markits so hopefully we have fulfilled all back order. Our intention is to move to Gibson wheels wherever possible. These are already used for P4 and some EM orders.
Motors - we have sourced a new six pole motor that appears to be more powerful than the Mashima 1020. It will be used in place of the Mashima as and when stocks run out. Mashima prices have already gone to silly levels so we are not buying anymore!
Gearboxes - at present most models use 38:1 gears from Markits and one of our etches. We intend to move to High Level units for all of our models along side the new motors. Newer kits already use them so it makes sense to try and standardise


News 03/07/2017

At last our 'expert' webmaster has discovered why the site kept crashing. He is working hard to ensure it does not happen again.

Haye Development products have been taken over by David Geen. Please see his website for contact details.

Frogmore Confederacy products are available direct from Steve Manchip 01548 531451 or Dart Castings.

All future new kits will come with lost wax castings exclusively, whitemetal will no longer be used.
We do hope to attend one or two shows during the year if we can.
Any enquiries you may have please feel free to e-mail or telephone us.
Iain Young & Phil Tuer


The current range of 4mm kits have been designed, for ease of assembly, with tabs and slots for location of parts. Loco bodies are of etched brass with etched nickel silver chassis. Components such as saddle tank, boiler, firebox, etc are predominantly pre-formed. Castings are of white metal or lost wax brass. Wheel bearings, handrail knobs and wire are included. Some kits contain sprung buffers. All parts, except wheels, gears, motor and pick-ups are present in a basic kit, and a "complete" kit contains all components to produce a running unpainted model. Comprehensive stage-by-stage instructions with exploded part diagrams ensure that construction is as easy as possible.

These items can be purchased from us online. Payments will be made securely via PayPal. You can use a PayPal Account if you have one, but you also have the option to pay using a Credit or Debit Card.

When purchasing items from our site you may find the system a little confusing. To clarify the procedure. Firstly choose your kit. Click on your choice of postage, if you wish to purchase the basic kit now go to your cart and pay. If you want a complete kit click the arrow on the right of the box and click "complete" this will add the motorising kit to your cart and give you the total amount to pay in your cart.

Please ensure we know which gauge you are going to build your model to, so that we can supply the correct wheels if necessary.

Since all items are individually custom packed they will be posted in approximately 21 to 28 days.
U.K. Orders can be sent either 1st Class Mail or by Special Delivery. Make your selection from the list of Options.
Non UK customers should select the Non UK Option. These customers should also note that we are not registered for VAT and therefore no VAT refunds are available.

Sort By:

CSP01 Avonside Class B3 0-6-0ST

£85.00


CSP01c Avonside Class B3 0-6-0ST Chassis only

£15.00


CSP02 Avonside Class SS 0-4-0ST

£85.00


CSP03 Kerr Stuart Victory Class 0-6-0T

£85.00


CSP04 Hawthorn Leslie 0-4-0ST

£78.00


CSP05 Hudswell Clarke 0-6-0ST

5 out of 5 Stars!
£83.00


CSP06 Hudswell Clarke 14 in 0-4-0ST

£80.00


CSP07 Hunslet 0-6-0T Jazzer

£83.00


CSP08 Robert Stephenson & Hawthorns/Yorkshire Engine 0-6-0ST

£85.00


CSP09 Hudswell Clarke 0-6-0T Canal & Sweden Type

£83.00


CSP10 Avonside 0-6-0ST ex-BP & GVR GWR 2194/5

£85.00


CSP11 Hudswell Clarke 0-6-0T

£85.00


CSP12 Manning Wardle 0-6-0ST Littleton No 4 & No 5

£85.00


CSP13 Hudswell Clarke/Robert Stephenson 0-6-0ST ex PTR GWR 813

£85.00


CSP14 Manning Wardle 0-6-0ST Warwickshire

£85.00


CSP15 Manning-Wardle "Q" Class 0-6-0ST Ex FY&NR/I.O.W Rlwy/ S.R. No W1.

£85.00 Call To Order


CSP16 Avonside 0-6-0ST

£85.00


CSP17 Manning Wardle 0-6-0ST

£85.00


CSP20 Sentinel 0-4-0 Steam Shunter

£140.00


CSP21 Fox Walker 0-6-0ST GWR 1331 (ex Whitland & Cardigan Railway no 3)

£85.00


CSP22 Hawthorne Leslie 0-6-0T Ex P&DSWJR/LSWR/SR. "A S Harris" SR 756

£90.00


CSP26 Hawthorne Leslie 0-6-2T Ex P&DSWJR/LSWR/SR. No SR 757/8/BR 30757/8. Earl of Mt Edgecumbe & Lord St. Levan.

£95.00


CSP30 Peckett 0-6-0ST Class "B1" Ex GWR 680

£95.00


CSP32 Peckett 0-4-0ST Type "E" Ex GWR 1143. Ex Swansea Harbour Trust

£95.00


CSP33 Peckett 0-6-0ST Class "B1" Ex GWR 679 & 1388

£95.00


CSP40 Peckett W4 Class 0-4-0ST "Hercules" BR (W) .

£95.00


CSP41 Peckett Class "W4" "Henry Cort" 0-4-0ST

£95.00

Powered by Abantecart eCommerce Solution